Edimax Technology VO-4500SK - Manual (Page 11)

3. USB VoIP Gateway Box Installation
3.1. USB VoIP Gateway Box Connection Figure
3.2. To Connect the USB VoIP Gateway Box
Step 1：
Remove the USB VoIP Gateway Box from the package.
Step 2：
Remove the telephone cable (RJ11) from the package, and connect one end to your existing telephone and
the other end to the “Phone” port at the back of the USB VoIP Gateway Box. Also connect your existing
telephone line from the wall to the “PSTN” port.
Step 3：
Remove the USB cable from the package and insert the small square side to the “USB” port at the back of
USB VoIP Gateway Box and the other end to your computer’s USB port.
USB
MIC SPK
Phone PSTN
1
2
11