Edimax Technology BR-6675nD - Manual (Page 75)

74
2.4GHz (B+G+N): Allows 802.11b, 802.11g, and
802.11n wireless clients to connect to this router
(recommended).
Channel Number Select a channel from the dropdown menu. All access
points must use the same channel (1 to 13).
MAC Address 1 to 4 Input the MAC addresses of the wireless access points
with which you wish to connect.
Wireless Module Select “Enable” to turn on the 2.4GHz wireless
signal and select “Disable” to turn it off.
Click “Apply” to save the changes, or click “Cancel” to discard the changes. After you
have clicked “Apply”, you will see the following message:
Click “Apply” to save the changes and restart the broadband router. It takes about 60
seconds for the broadband router to restart. Click “Continue” to configure other settings.