Edimax Technology EW-7722In - Manual (Page 60)

53
access point. If you wish to save this connection as a profile, you can
click ‘Export Profile’ button, and this connection will be saved. You
can find this connection in ‘Profile’ tab in a later time.
7. Sometime WPS may fail (In the following picture, WPS pairing is
failed because no WPS-enabled access point is found):
You can click ‘PBC’ button few more times to try again. When an
access point is connected, you can click ‘Disconnect’ to disconnect
your wireless network card from a connected access point, or select
another WPS-enabled wireless access point, then click ‘Connect’ to
establish connection to selected access point, if there are more than
one WPS-enabled access point found. You can also click ‘Rotate’
button, and next access point on the list will be selected to establish
connection.
If you want to delete a found access point from the list, select it and
click ‘Delete’ button.