Edimax Technology BR-6424n - Manual (Page 85)

3-4-1-4 AP Bridge-Point to Multi-Point
In this mode, you can use this broadband router as a wireless network
bridge and let all computers connected to the LAN ports of all wireless
access points to communicate with each other. This mode supports up to
four wireless access point peers.
Please note that when you select this mode, this broadband router will act
as wireless bridge only, and will not accept other wireless clients.
Also, you can connect to the wireless access point with the same
functionality only. If you wish to connect to the wireless access points
made by other manufacturer, please select ‘AP Bridge-WDS’ mode if the
wireless access point you wish to connect supports WDS.
Here are descriptions of every setup items:
Item Name
Description
Band Please select the radio band from one of
following options (must be the same with the
wireless access point you wish to connect):
2.4 GHz (B): 2.4GHz band, only allows
802.11b wireless network client to connect this
router (maximum transfer rate 11Mbps).
2.4 GHz (N): 2.4GHz band, only allows
802.11n wireless network client to connect this
router (maximum transfer rate 300Mbps).
2.4 GHz (B+G): 2.4GHz band, only allows
802.11b and 802.11g wireless network client to
connect this router (maximum transfer rate
11Mbps for 802.11b clients, and maximum
54Mbps for 802.11g clients).
2.4 GHz (G): 2.4GHz band, only allows
802.11g wireless network client to connect this