Gembird STR-FFB2 User Manual
Page 7

7
GEMBIRD EUROPE B.V.
STR-FFB2 USB FORCE FEEDBACK STEERING WHEEL
•
Press the 9 button to select the sensitivity, it will change according to the
following modes:
Mid. (green LED on) -> High (green LED flash fast) -> Low (green
LED flashes slowly)
•
Press the UP direction of D-Pad, and it will exit from the sensitivity setup
function
Set foot pedals as RY axis function (ANALOG mode)
•
Press the 9+10 buttons for 3 seconds, the green LED is on
•
Press the left direction of D-PAD, green LED is off and the settings
comes into effect
Foot pedals has imitated Analog function in Digital mode
The flash frequency is higher, the value change is bigger.
Force feedback / Dual shock function choose
Force feedback is the default mode. Press "7+8+9" buttons to change to
Dual shock mode, the Program LED of Dual Shock is on. Press "7+8+9"
buttons again to return to Force feedback mode.
Troubleshooting
After setting up Software and Hardware, the steering wheel still cannot
work:
•
Please check whether the steering wheel cable is correctly connected
with your PC
•
Make sure that the correct options are selected. "Game Port Steering
Wheel Controller" in the "Game Controller" of "Control Panel" is
"Confirmation", and "Controller ID" of "Game Port Steering Wheel