Festool T 18+3 Li - Manual (Page 13)

T 12 + 3, T 15 + 3, T 18 + 3
13
GB
1.3 Emission levels
Levels determined in accordance with EN 60745 are
typically:
Vibration emission value a
h
(vector sum for three di-
rections) and uncertainty K measured in accordance
with EN 60745:
The specified emissions values (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary esti-
mates regarding vibration and noise loads during
operation.
– They represent the primary applications of the
power tool.
Increase possible for other applications, with other
insertion tools or if not maintained adequately. Take
note of idling and downtimes of machine!
2 Symbols
3 Technical data
Sound pressure level L
PA
= 65 dB(A)
Sound power level L
WA
= 76 dB(A)
Uncertainty K = 3 dB
Wear ear protection.
Drilling in metal a
h
< 2,5 m/s
2
K = 1,5 m/s
2
Screwing a
h
< 2,5 m/s
2
K = 1,5 m/s
2
Warning of general danger
Risk of electric shock
Read the Operating Instructions/Notes!
Wear ear protection.
Wear protective gloves.
Wear protective goggles.
Do not throw in the household waste.
Cordless drill T12 + 3 T15 + 3 T18 + 3
Motor voltage 10,8 - 12 V 14,4 - 15,6 V 18 V
Idling speed* 1st gear 0 - 450 rpm
2nd gear 0 - 1500 rpm
Max. torque Soft material (wood) 20 Nm 27 Nm 30 Nm
Hard material (metal) 34 Nm 40 Nm 45 Nm
Adjustable torque** 1./2. gear 0,5 - 8 Nm
Chuck clamping range 1,5 - 13 mm
Max. drill diameter in wood 25 mm 35 mm 45 mm
metal 14 mm 16 mm 16 mm
Tool holder in drill spindle 1/4 ’’
Weight without battery, with Centrotec 1,0 kg 1,0 kg 1,05 kg
Charger TCL 3
Mains voltage (input) 220 - 240 V ~
Mains frequency 50/60 Hz
Charging voltage (output) 10,8 - 18 V=
Rapid charging max. 3 A
Conservation charging, intermittent (NiCd, NiMH) approx. 0,06 A
Charging times for BP, BPS and BPC battery packs
Li-ion 1,5 Ah, 80 %/100 % approx. 25/35 min.
Li-ion 3,0 Ah, 80 %/100 % approx. 55/70 min.