Festool TP 220 User Manual
Page 9
TP 220
9
GB
Original operating manual
The specified illustrations appear at the be-
ginning of the Operating Instructions.
1
Technical data
2
Symbols
Warning of general danger
Manual, read the instructions
Wear protective gloves.
Wear protective goggles.
Caution! Risk of cutting!
3
Machine features
4
Intended use
The device is designed to perforate wallpa-
per. The device makes holes and tears in
wallpaper so that water containing wallpaper
stripper can penetrate more efficiently. This
function is only effective on wallpaper affixed
using water-soluble adhesive.
The user bears the responsibility for damage
and accidents caused by improper use.
5
Safety instructions
– Always attach the protective cover over
the rollers when the device is not in use.
Risk of injury!
– Ensure that persons standing near the ma-
chine are at a safe distance from the work
area.
– Wear protective goggles and protective
clothing.
– Do not touch the blade rollers. Risk of in-
jury!
– When using solvent, always observe the
safety instructions provided by the manu-
facturer.
– Make sure that the area where you are us-
ing the solvent is well ventilated.
6
Working
X
Removing and attaching the protective
cover
[Fig. 3]
.
Adjust the length of the telescopic rod.
X
Open the clamp lever
[2-1]
!
X
Pull the telescopic rod to the desired
length.
X
Close the clamp lever
[2-1]
!
L
The telescopic rod can be adjusted to any
length. The retaining force of the clamp
lever can be adjusted using the screw
[2-
2]
while the lever is closed.
Adjusting the perforation depth
X
Set to the required perforation depth us-
ing the rotary knob
[4-1]
.
L
The plaster / sublayer may be damaged if
you adjust the perforation depth too high.
Start with the lowest setting and increase
the perforation depth if required. One turn
of the rotary knob corresponds to 1 mm.
1
Technical data .......................... 9
2
Symbols .................................. 9
3
Machine features ...................... 9
4
Intended use............................ 9
5
Safety instructions .................... 9
6
Working................................... 9
7
Service and maintenance ........... 10
7.1
Replacing the blade rollers ......... 10
8
Accessories .............................. 10
9
Warranty ................................. 10
FAKIR TP 220
Weight incl. protective
cover
1.7 kg
Weight excl. protective
cover
1.5 kg
Length
870 - 1370 mm
Max. perforation depth
3 mm
[1-1]
Telescopic handle
[1-2]
Clamp lever for adjusting the length
of the telescopic handle
[1-3]
Perforation depth adjuster
[1-4]
Blade roller
[1-5]
Protective cover
CAUTION
Loose wallpaper residue may fall into
your eyes!
X
Wear protective goggles.
X
Wear suitable protective clothing.