Festool LRS 93 G - Manual (Page 12)

12
LRS 93 GB
Original operating manual
The specified illustrations appear at the begin-
ning of the Operating Instructions.
1 Symbols
2 Technical data
3 Intended use
The orbital sanders LRS 93 M and LRS 93 G are
compressed-air tools for sanding wood, plastic,
metal, stone, composite materials, paint/van-
ish, fillers and similar material. Materials con-
taining asbestos must not be processed.
The user bears the responsibility for dam-
age and accidents caused by improper
use.
4 Safety instructions
4.1 General safety instructions
Warning! Before setting up, using,
repairing and servicing this air tool or
replacing accessory parts, you must have
read and understood all safety instruc-
tions and information. Ignoring warning
notes and instructions may result in serious in-
juries.
Keep all of the attached documents and pass on
the documentation if the machine changes
ownership.
a)Keep your work area tidy! Untidiness in
work areas can lead to accidents.
b)Take account of environmental influenc-
es. Do not leave pneumatic tools out in the
rain. Keep work area well lit.
Never use pneumatic tools in the vicinity of
flammable liquids or gases.
c)Keep away from children. Do not allow
others to touch the pneumatic tool or the
compressed-air hose.
Keep others away from your work area.
d)Store your pneumatic tools safely. Un-
used pneumatic tools should be stored in a
dry, inaccessible or locked location, out of the
reach of children.
e)Use the correct pneumatic tool. Do not
use the pneumatic tool for purposes for which
it was not intended.
f) Wear suitable work clothes! Do not wear
loose fitting clothing or jewellery. They can
get entangled in moving parts. Rubber gloves
and non-slip footwear are recommended for
outdoor work. Long hair should be protect-
ed with a hair net.
g)Wear safety goggles! You should also wear
a face mask for work which produces dust.
h)Connect a dust extractor. Make sure that
available dust extraction equipment is con-
nected and used correctly. Observe the re-
1 Symbols .................................. 12
2 Technical data .......................... 12
3 Intended use ........................... 12
4 Safety instructions.................... 12
5 Compressed-air supply and commis-
sioning.................................... 14
6 Settings .................................. 15
7 Service and maintenance........... 15
8 Accessories.............................. 16
9 Disposal .................................. 16
10 Warranty ................................. 16
11 EU Declaration of Conformity ..... 16
Warning of general danger
Manual, read the instructions
Wear protective goggles.
Wear ear protection.
Do not throw in the household waste.
Compressed air orbital
sander LRS 93 M,
LRS 93 G
Drive Compressed-air vane
motor
Operating pressure (flow
pressure) 6 bar
Speed 4000 - 7000 rpm
Working strokes 4000 - 14000 rpm
Sanding stroke 5 mm
Air consumption at nominal load 310 l/min
Sanding base (replaceable) 93 x 175 mm
Weight 1,4 kg