Jotul F100 - Manual (Page 19)

19
ENGLISH
4.0 Service
Warning! Any unauthorised change to the product is illegal!
Only use original spare parts!
4.1 Replacement of the baffle plate –
inner bottom – burn plates
1. Remove the ash retainer.
2. Lift the baffle, which rests on the burn plates, forwards and
to the side and then tilt it down and out of the door. (If the
product is rear-mounted the top plate may be lifted off and
the baffle removed through the top.)
3. Lift up the inner bottom and tilt it out.
4. Remove the burn plates.
Follow the same procedure for installation, but in reverse.
5.0 Optional equipment
5.1 Floor plate
For the Jøtul F
100 we can supply a decorative blue-black
enamelled floor plate.
Size: 630 x 759 x 17 mm.
5.2 Long legs
If you would like a taller fireplace it is possible to install longer
legs. Height 215 mm.
5.3 Extra heat shield - Cat. no. 50012956
If the product is mounted with an extra heat shield, see fig. 1 for
distances from wall to stov
e.