Accessories, Name and function of parts, Main unit – Pioneer PDK-50HW3 User Manual
Page 5
18
En
ACCESSORIES
Using this list, confirm that all accessories are present, and check them off one-by-one here
✔ .
Pen (x1)
AAA (LR03) alkaline batteries (x2)
Replacement tips (x2)
Pen stand (x1)
Allen bolt (x1)
Operating Instructions (x1)
CD-ROM(Driver software disc) (x1)
Driver Installation Guide (x1)
Rear side
of unit
Mode selector switch
Set the mode switch in
accordance with whether
you will use the special
pen or other device to
input characters and lines
on the screen.
PEN Mode:
In this mode, the
special accessory
pen can be used to write
on the screen. Using the
special pen allows the
drawing of more clearly
delineated characters and
lines.
NORMAL Mode:
In this mode, your
finger or other
object can be used to write
on the screen. This mode
will produce lower screen
definition, however,
compared to drawing with
the dedicated input pen.
Power indicator
(Lights green when ON)
IR transmitting filter
PEN
NORMAL
NAME AND FUNCTION OF PARTS
Main Unit
NOTE:
When the power switch is first turned on, the power indicator will
flash orange; while the indicator is flashing, do not touch the
screen, since the unit is initializing its internal settings.