2Wire third-party wireless Ethernet adapters - Manual (Page 18)

14
3. The Connect to Wireless Network screen appears. In the Available networks field, select your wireless
access point. The wireless access point displays as “ 2WIRE” in all capital letters, followed by the last
three digits of the HomePortal serial number (located on the bottom of your HomePortal).
4. In the Network key field, enter your ten-digit Wireless Encryption Key, located on the bottom of your
HomePortal.
5. Click Connect .
6. A notification message now appears next to the Wireless Network Connection icon indicating that your
wireless adapter is connected to your network.