Operating instructions – Zanussi SD 2811 W User Manual
Page 5
5
Congratulations on your new
purchase
We recommed that you read these instructions care-
fully in order to quickly become familiar with your
new appliance.
A good appliance, which is used properly, will
serve you for many years.
Unpacking the appliance
Dispose of packing materials in accordance with
local regulations and with due regard to safety. Risk
of suffocation!.
Check the spin dryer for any transport damages,
which must be reported to the retailer or delivery
company responsible within 7 days.
Preparation for Use
1. Put the operating lever in the “OFF” (0)
position.
2. Open the lid.
3. Remove the transport safeguard from inside
the spin drum.
4. We recommend that the spin drum be wiped with
a wet cloth using a solution of water and mild
washing up liquid. Before using
for the first time.
5. Place the spin dryer on a level floor at a
distance of about 50 cm away from the
wall or other objects. Never balance out
irregularities in the floor surface by laying
wood, paper or similar materials under the
appliance.
Loading the machine
1. Place a sufficiently large container for excess
water under the outlet spout.
2. Plug the appliance in to a mains socket
(please observe the Points of Safety).
3. Place each article of laundry singly in the
spin drum. Distribute the washing evenly
in the drum and press down firmly, so as to
avoid leaving empty spaces (and thus avoiding
excessive vibration of the machine during
operation).
4. Press the loaded washing down, so that
there is a gap of at least 3 cm between the
washing and the top edge of the drum.
Lastly, cover the washing with a cloth, the ends
of which should be tucked well down inside the
drum, so as to avoid items of washing being
catapulted out during operation.
5. Close the lid.
Switch on the appliance
Turn the operating lever to the right as far as it
will go to the “ON” (I) position.
The spin dryer is now in operation and water flows
out of the outlet spout.
Spin Drying Times
• For normal washing: 3-5 minutes.
The residual moisture amounts to:
approx: 65% in machines with a spin speed of
1400
rpm;
approx: 40% in machines with a spin speed of
2800
rpm;
• For washing which requires no ironing:
15-30 seconds max.
Switch off the appliance
When water ceases to flow out of the outlet spout,
or when the spin process is to be terminated, turn
the operating lever back to the left to the “OFF” (0)
position.
When the drum has come to a standstill, open the
lid. A special safety device prevents the lid being
opened before the drum has stopped spinning.
Never force the lid open
Remove the laundry from the drum.
Gently tilt the spin dryer forward, so that any
remaining water can flow out of the outlet spout.
Switch off the power supply. Pull out the plug.
A
B
Operating Instructions
C
D
A
E
E