Select the spin speed or option, Or r, Select the programme – Zanussi ZWD 1261 W User Manual
Page 9: Start the machine, At the end of the programme, No spin, Inse
9
Close the drawer gently.
4. Select the spin speed or option
NO SPIN
or R
INSE
H
OLD
Turn the dial to the required position.
5. Select the programme
Turn the programme selector dial clockwise to the
programme K.
K
M0017a
45
0
55
0
65
0
750
850
10
00
12
00
spi
n
no
hold
rinse
C0065
6. Start the machine
Before starting up the machine check that:
●
the appliance is plugged in
●
the water supply taps are turned on
●
the drain hose is correctly and securely positioned
●
the door and the detergent dispenser drawer are
closed.
Depress the “On-Off” button: the mains-on light will
illuminate and the machine starts operating.
7. At the end of the programme
The machine stops automatically.
If you have selected the “R
INSE
H
OLD
” option, the
machine will stop with the water of the last rinse left in
the tub, to prevent the fabric from creasing. To drain
only, select position “
NO SPIN
” or the drain programme
“S”.
To drain and spin, select programme “M” or turn the
spin speed selector dial to the desired speed position: the
machine will spin at the selected speed.
The door is controlled by a safety device which releases
2 minutes after the end of the programme.
Switch the machine off by depressing the “On-Off”
button again. The mains-on light goes out.
When the programme has finished you are advised to
unplug the appliance and turn off the water taps.
T0001S
On-Off
132986760.qxd 31/03/2005 09:41 Pagina 9 (Nero/Process Black pellicola)