Yamaha AX-10 - Manual (Page 7)

English
4
Set the tape deck to be used for recording in the
recording mode.
5
To monitor the sound to be recorded, select the tape
deck being used for recording with the INPUT selector.
1
Select the source to be recorded.
2
Play the source.
3
Confirm the source by selecting it with the INPUT
selector and turning up the VOLUME control.
7
Notes
● If you want to enjoy another source while recording, select it
with the INPUT selector.
● VOLUME, BASS, TREBLE, BALANCE controls and PURE
DIRECT switch settings have no effect on the material being
recorded.
TO RECORD A SOURCE TO TAPE (OR DUB FROM A TAPE TO ANOTHER)
When you listen with headphones
Connect the headphones to the PHONES jack. When listening
with headphones privately, set both the SPEAKERS A and B
switches to the OFF position.
PHONES
3, 5 3
1
REC OUT
PHONO
TUNER TAPE 1
TAPE 2
AUX
CD
INPUT
CD
TAPE 1 TUNER
TAPE 2
AUX
PHONO
INPUT
CD
TAPE 1 TUNER
TAPE 2
AUX
PHONO
0 l0
VOLUME