Z Microsystems GLIDER 20 - Manual (Page 15)

Doc# 27-0006UM Issued 11/00 Rev 1.0
Operation
CONNECTING CABLES
TURN ON POWER
NOTE: Connecting to non-standard
systems will require an
adapter. To obtain a video
adapter, contact Customer
Services at Z Microsystem,
Inc.
NOTE: Incorrect cable connections
may result in irregular
operation, damage display
quality/components of the
LCD module and/or shorten
the module’s life. Always
consult the computer system
manual. Verify the system’s
compatibility to ensure
proper operation.
1 5
Turn on the Glider at
the power switch on the
back of the display. Off
is when the straight line
is down. On is when
the circle is down.
NOTE: Make sure the DC
connector is pluged
in all the way on the
back side of the
display head.