Yard-Man 31AE553F401 - Manual (Page 4)

4
SECTION 2: FINDING SNOW THROWER MODEL NUMBER
This Operators Manual is an important part of your new snow thrower. It will help you assemble, prepare and
maintain your snow thrower. Please read and understand what it says.
Before you prepare your snow thrower for its first use, please locate the model plate and copy the information
from it in this Operators Manual. The information on the model plate is very important if you need help from
your dealer or the MTD Customer Support Department.
• Every snow thrower has a model plate. You can locate it by standing behind the unit in the operating
position and looking down at the dash panel.
• The model plate will look like this.
SECTION 3: CALLING CUSTOMER SUPPORT
If you are having difficulty assembling this product or if you have any question regarding the controls,
operation or maintenance of this snow thrower, please contact the Customer Support Department. You can
reach them by calling:
1-800-800-7310
Before you call, make sure that you have the snow thrower model and serial numbers ready. This will help the
Customer Support Representative give you faster service. To find your unit’s model and serial numbers, see
the previous section.
SECTION 4: UNPACKING THE SNOW THROWER
1. Remove screws from the top sides and ends of the shipping crate.
2. Remove panels and set aside to avoid tire punctures or personal injury.
3. Remove and discard plastic bag that covers unit.
4. Roll unit out of crate.
5. Make sure to retrieve all loose parts and hardware bag from the crate before discarding it.
MTD PRODUCTS INC
CLEVELAND, OHIO 44136
XXX-X-XXX-X-XXX XXXXXXXXXXX
This is where model number will be.
This is where serial number will be.
Copy the model number here:
Copy the serial number here: