Yamaha TX-497 - Manual (Page 16)

12
TUNING
■ Automatically presetting FM stations
You can use the automatic preset tuning feature to store
FM stations. This function enables this unit to
automatically tune into FM stations with strong signals,
and to store up to 40 (8 stations in 5 groups, A1 through
E8) of those stations in order. You can then recall any
preset station easily by selecting the preset station number.
1
Press FM/AM to select the FM band.
“FM” appears in the front panel display.
2
Press and hold MEMORY (MAN’L/AUTO FM)
for more than 3 seconds.
The preset group and MEMO and AUTO indicators
flash. Automatic presetting starts from the frequency
currently displayed and proceeds toward the higher
frequencies.
When automatic preset tuning is complete, the front
panel display shows the frequency of the last preset
station.
• Any stored station data existing under a preset number is
cleared when you store a new station under that preset number.
• If the number of received stations does not reach 40 (E8),
automatic preset tuning has automatically stopped after
searching all stations.
• Only FM stations with sufficient signal strength are stored
automatically by automatic preset tuning. If the station you
want to store is weak in signal strength, tune into it manually
and store it by following the procedure in “Manually presetting
stations”.
• If no station is received using the automatic preset tuning
method, “NOTHING” is displayed in the front panel display for
about 3 seconds and the search ends.
Presetting stations
FREQ/TEXT FREQ/TEXT EON EON
MODE MODE
PTY SEEK PTY SEEK
START START
FM/AM EDIT
MAN'L/AUTO FM
MEMORY TUNING MODE
TUNING
h l POWER
A/B/C/D/E
2 3 4 5 6 7 8 1
AUTO/MAN'L
1 2
FM/AM
MEMORY
MAN'L/AUTO FM
MHz
AUTO ST
MEMO
Notes