Teleconverter care, Standard accessories – Nikon TC-20E III User Manual

Page 19

■

Teleconverter care

• Be careful not to allow the CPU contacts to become

dirty or damaged.

• Clean teleconverter's lens surfaces with a blower

brush. To remove dirt and smudges, use a soft, clean

cotton cloth or lens tissue moistened with ethanol

(alcohol) or lens cleaner. Wipe in a circular motion from

the center to outer edge, taking care not to leave

traces or touch other parts of the lens.

• Never use organic solvent such as thinner or

benzene to clean the teleconverter's lens.

• When storing the teleconverter, attach both the

front and rear teleconverter caps.

• When the lens will not be used for an extended

period of time, store it in a cool, dry place to

prevent mold and rust. Be sure to store the

teleconverter away from direct sunlight or

chemicals such as camphor or naphthalene.

• Do not get water on the lens or drop it in water as

this will cause it to rust and malfunction.

• Reinforced plastic is used for certain parts of the

lens. To avoid damage, never leave the lens in an

excessively hot place.

■

Standard accessories

• Teleconverter Cap BF-3A

• Rear Lens Cap LF-1

• Flexible Lens Pouch CL-0715