Yamaha CRX-E300 - Manual (Page 14)

10
TUNING
Automatic tuning
1
Select TUNER by turning INPUT so that the
frequency of a radio station appears in the display.
2
Press PRESET/BAND to select the reception band.
Do not select the preset tuning mode (in which
“PRESET” appears on the display).
3
Press AUTO/MAN’L so that “AUTO” appears in the
display.
4
Press PRESET/TUNING (for a higher
frequency) or (for a lower frequency).
5
The unit starts searching for a station.
When the unit finds a station, the unit stops searching
and “TUNED” appears on the display.
6
If the located station is not the one you want, repeat
steps 4 and 5 until a station you want is tuned.
Notes
• If automatic tuning search does not find the desired station, try
manual tuning as described next.
• When an FM stereo broadcast with sufficient signal strength is
received, “STEREO” appears on the display and you can listen
to stereo sound.
You can find radio stations automatically and manually. Manual tuning
1
Follow steps 1 and 2 described in “Automatic
tuning.”
2
Press AUTO/MAN’L so that “AUTO” disappears
from the display.
3
Press PRESET/TUNING (for a higher
frequency) or (for a lower frequency) to select
your desired station.
• Each time you press PRESET/TUNING
or
, the frequency changes step by step.
STEREO AUTO
TUNED
PRESET/TUNING /
PRESET/BAND
BALANCE
INPUT
VOLUME
L R
TREBLE BASS
PHONES
STANDBY/ON
TIMER DISPLAY MEMORY
NATURAL SOUND CD RECEIVER CRX-E300
AUTO/MAN'L PRESET/BAND
TIMER HOUR MIN MIN MAX
PRESET/TUNING
TIMER ADJ
+ – + –
INPUT
AUTO/MAN’L
0105CRXE300(UCA).10-11.E 02.5.23, 5:09 PM 10