Yamaha RX-496RDS - Manual (Page 13)

13
English
1
Multi-information display
Displays various information, for example station frequency,
preset station number and name of selected input source.
2
AUTO indicator
Lights up when this unit is in the automatic tuning mode.
3
STEREO indicator
Lights up when an FM stereo broadcast with sufficient signal
strength is received.
4
Signal-level meter
Indicates the signal level of the received station.
If multipath interference is detected, the indication decreases.
5
MEMO indicator
When the MEMORY button is pressed, this indicator flashes
for about 5 seconds. While this indicator is flashing, the
displayed station can be programmed to the memory by using
the A/B/C/D/E button and the preset station number selector
buttons.
6
RDS mode indicators
RX-496 and RX-396RDS only
The name(s) of RDS mode(s) employed by the currently
received RDS station light(s) up. Illumination of the indicator on
the head of a name shows that the corresponding RDS mode
is now selected.
7
PTY HOLD indicator
Lights up while the search is performed in the PTY SEEK
mode.
8
EON indicator
Lights up when an RDS station that employs the EON data
service is received.
9
Program type name indicators
The name selected in the EON mode lights up.
0
SLEEP indicator
Lights up while the built-in SLEEP timer is functioning.
A
TAPE MON 2 indicator
Lights up when the tape deck (or MD recorder etc.) connected
to the TAPE 2 terminals on the rear of this unit is selected as
the input source by pressing the TAPE 2 MONITOR button.
DISPLAY PANEL
MHz
STEREO
0 20 l00
AUTO
SLEEP
TAPE MON
2 MEMO PS PTY HOLD EON NEWS INFO AFFAIRS SPORT RT CT PTY
1
5 6 7 8 9 0
2 3 4
A
RX-496RDS and RX-396RDS only
RX-496RDS and RX-396RDS only
RX-496RDS and RX-396RDS only
RX-496RDS and RX-396RDS only
: RX-496RDS and RX-396RDS only