Receiver connections, Subwoofer connection – Yamaha NS-FP9500 User Manual
Page 2
10
11
12
13
15
Connect Main Speakers Unplug receiver before proceeding. Identify
“Front” or “Main” speaker terminals on receiver. Connect left main speaker
wire to left main terminals and right main speaker wires to right main
terminals as shown. Positive (+) side of the wire with white stripe attaches
to red terminal. Negative (-) side attaches to black terminal.
Receiver Connections
NOTE
Receiver shown is for illustration purposes, yours may differ.
CAUTION
Receiver must not be plugged in while connecting speakers.
Connect Rear Speakers Identify “Rear” or “Surround” speaker
terminals on receiver. Connect left rear speaker wire to left rear terminals
and right rear speaker wire to rear right terminals as shown. Positive (+)
side of the wire with white stripe attaches to red terminal. Negative (-)
side attaches to black terminal.
Connect Center Speaker Identify Center speaker terminals on receiver.
Connect center speaker wire to center terminals as shown. Positive (+) side
of the wire with white stripe attaches to red terminal. Negative (-) side
attaches to black terminal.
Connect Rear Center Speaker Identify Rear Center speaker terminals
on receiver. Connect rear center speaker wire to rear center terminals as
shown. Positive (+) side of the wire with white stripe attaches to red
terminal. Negative (-) side attaches to black terminal.
Subwoofer Connection
16
Enjoy the Home Theater Experience We hope you enjoy the sound of your Yamaha Home Theater speaker system.
YAMAHA ELECTRONICS CORPORATION, USA
6660 Orangethorpe Avenue
Buena Park, CA 90620
http://www.yamaha.com
Phone: 1-800-292-2982
©2004 Yamaha Electronics Corporation
Printed in USA
Plug In Plug in the subwoofer and receiver each into
an electrical outlet. Power on the receiver first then the
subwoofer. Adjust volume on the receiver to taste. Please
see your receiver’s owner’s manual for recommended
guidelines and settings.
Part No. 9500QCG rev4
04/04
Connect RCA Cable Connect RCA cable
to subwoofer.
Set subwoofer VOLUME control to half-way mark and POWER to
OFF. Connect RCA cable to receiver from subwoofer.
CAUTION
Subwoofer must not be plugged in while connecting it.
YST-SW030 Subwoofer
14