Yamaha YSP-4000 - Manual (Page 2)

YSP-4000
Digital Sound Projector™
Panasonic VIERA Link Compatibility
When the YSP-4000 is connected to the Panasonic
VIERA Link compatible TV via HDMI, you can turn
on/off the YSP with the TV, adjust the volume of
the YSP, and shift the audio between them by its TV
remote unit.
Other Notable Features
• 7 CINEMA DSP programmes: Three Movie, three
Music and Sports
• Compressed Music Enhancer
• TruBass uses harmonics to make the bass from
small speakers deeper and richer
• Night Listening mode and TV Equal Volume
• Turn On Volume: Volume comes on at a preset
level when power is turned on
• Can be wall mounted or placed on a shelf or rack
• Custom installation compatibility: IR in, IR out
and RS-232C interface
• IR pass through out
• iPod song titles displayed in English and Western
European languages ISO 8859-1 (Latin1) on the
front panel and on-screen display.
• Multi-language on-screen display: English, French,
German, Spanish, Russian, Italian and Dutch
• Built-in FM tuner
• Parameter settings can be made
manually
• Dolby Digital, DTS, Dolby Pro Logic II
and DTS Neo:6 compatibility
• Maximum Volume: for avoiding sudden
loud sounds
• Memory Save Lock
• Detachable AC inlet cable
• Preset remote unit
• Front panel lock, extended IR and
demo mode
Digital Sound Projector™ Technology
Delay Control
Digital Amplifiers
Speaker Array
Aiming of Sound Beam
• Manufactured under license from 1 Ltd.
True Surround Sound
True Multi-Channel Surround Sound from All
Sources, Including TV
As amazing as it seems, the YSP-4000 can actually
deliver multi-channel sound that surrounds listeners
the same way that sound from front, centre and rear
speakers does. DVD movies and other digital sources
sound just the way they are supposed to. Dolby Pro
Logic II is included, so even 2-channel TV sound can
be heard in glorious multi-channel surround.
Digital Amplifier Built-in
The YSP-4000 has
a powerful and
efficient digital
amplifier built in.
It powers the 40
beam drivers at
2W each and the two woofers at 20W each, for a
total of 120W of power. There is no need for the
customer to purchase an additional amplifier or
receiver, so the system is compact and economical.
Wide Variety of Beam Settings
The My Surround mode provides surround sound
without reflecting the beams off the walls. It is
handy for rooms where for some reason the walls can
not be used well and delivers a good surround effect
when listeners are close to the unit. My Surround
uses a combination of DiMagic and Yamaha
technology.
The My Beam setting focuses the sound at a
specific listening position, so even in noisy
surroundings you can hear dialogue and other sounds
clearly. Sonic sensor means that My Beam can be
selected with the remote control from almost any
angle. There are also five other selectable beam
settings: 5 Beam, 3 Beam, 3 Beam + Stereo, and 2ch
Stereo and 5ch Stereo that outputs stereo sources
from all of the 5-channel beams, providing a more
expansive sound field.
Front Panel Mini Jack
A mini jack on the front panel makes it convenient to
connect portable audio players.
Advanced Features
Analogue Video to HDMI Digital Video Upconverion
The YSP-4000 provides upconversion of video
composite and component signals to HDMI. The signal
can then be output via a single HDMI cable to a
monitor for enjoying high-definition video quality. The
output supports 1080p/24Hz, and 50Hz (PAL) or 60Hz
(NTSC) video signals, so they can be throughput to a
monitor for enjoying high definition video quality.
High-Definition Video Upscaling to 1080i/720p
The YSP-4000 provides analog video-upscaling of
composite 480i/576i signals and of component
480i/576i or 480p/576p signals to HDMI 1080i/720p
resolutions for optimal viewing on high-definition
displays. It uses advanced processing including video
encoding/decoding ICs from Analog Devices and a TBC
(Time Base Corrector) to restore degraded video
signals for distortion-free viewing.
IntelliBeam Automated System Calibration
This Yamaha exclusive feature ensures optimum multi-
channel sound reproduction with accurate image
location. By monitoring and analysing the sound with
the microphone included with the YSP-4000,
IntelliBeam automatically sets the best beam angles,
while optimizing the level and frequency response of
each beam. It also offers Direct Start function via
remote unit. This makes initial setup both extremely
simple while acoustically perfect.
The optional YDS-10 Universal Dock lets you
connect your iPod to the YSP-4000. You can
listen to your iPod music and watch iPod images
and movies on your monitor via the YSP-4000.
You can also operate your iPod via the
YSP-4000’s remote unit with the On-Screen
Display and charge your iPod.
Works with: iPod nano, iPod mini
and iPod (Click Wheel)
The YSP-4000 applies this sophisticated technology
to precisely control the orientation of the sound by
focusing it through multiple beams. The centre
channel sound is heard directly, while sounds from
other channels are heard after reflecting off walls.
The result is true multi-channel surround sound that
sounds just like a multi-speaker system – but
without the need for extra speakers!
iPod not included
YDS-10 Universal Dock for iPod
“d-cinema” is the slogan of Yamaha A/V
products and technology, reflecting our
focus on digital technology and our
leadership in creating and refining digital home theatre.
• “Digital Sound Projector” and “ “ are trademarks of 1 Ltd. • HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC. • iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries. • Dolby and the double-D symbol are
registered trademarks of Dolby Laboratories. • ”DTS” and “DTS Neo:6 ” are registered trademarks of DTS, Inc. • TruBass is a trademark of SRS Labs, Inc. • EUPHONY
is a trademark of DiMAGIC Co., Ltd. • CINEMA DSP, SILENT CINEMA and IntelliBeam are trademarks of Yamaha Corporation. • Product designs and specifications
are subject to change without notice.
• HDMI (2 in/1 out) interface
• Dock terminal for YDS-10
• 2 optical, 2 coaxial digital and 2 analogue audio inputs
• 2 component video inputs and 1 output
• IR in
SPM-K30:
Optional Wall Hanging Bracket
Main Specifications
Speakers Section
4cm x 40 drivers
11cm x 2 woofers
Digital Amplifier 120 W total power:
2 W x 40 + 20 W x 2
Standby Power Consumption 0.5 W
Dimensions (W x H x D) 1,030 x 198 x 144 mm
Weight 16 kg
N E W P R O D U C T B U L L E T I N
• RS-232C interface
• IR pass through out
• Subwoofer output
• FM antenna terminal
Analogue Video
Digital Video
Through
Upconversion
[ Input ] [ Output ]
HDMI HDMI
Component Component
Composite Composite
My Beam 5-Beam My Surround
*YSP4000A@NPB 07.7.17 4:40 PM Page 2