Yamaha NS-300 - Manual (Page 5)

English
5
SPECIFICATION
Type
NS-300 ........... 2-way 3-speaker bass reflex speaker system
(Magnetically-shielded type)
NS-200 .......... 2-way 2-speaker bass reflex speaker system
(Magnetically-shielded type)
Speaker Unit
NS-300 .................................... 16 cm (6.5”) cone woofer x 2
3 cm (1”) dome tweeter
NS-200 ......................................... 16 cm (6.5”) cone woofer
3 cm (1”) dome tweeter
Nominal Impedance ....................................................... 6 ohms
Frequency Response
NS-300 ......................................................... 30 Hz – 35 kHz
NS-200 ......................................................... 35 Hz – 35 kHz
Nominal Input Power
NS-300 ....................................................................... 140 W
NS-200 ....................................................................... 100 W
Maximum Input Power
NS-300 ....................................................................... 400 W
NS-200 ....................................................................... 300 W
Sensitivity
NS-300 ......................................................... 91 dB/2.83 V/m
NS-200 ......................................................... 90 dB/2.83 V/m
Crossover Frequency ....................................................... 3 kHz
Dimensions (WxHxD)
NS-300 ................................................. 212 x 900 x 317 mm
(8.3” x 35.4” x 12.5”)
NS-200 ................................................. 212 x 850 x 317 mm
(8.3” x 33.5” x 12.5”)
Weight
NS-300 ..................................................... 19.0 kg (41.9 lbs.)
NS-200 ..................................................... 16.8 kg (37.1 lbs.)
Accessories ................................................................ Stand x 4
Screw (6 mm) x 4
Wood screw (4 mm) x 4
Washer x 4
Pad x 4
Spike x 4
Nut x 4
● Specifications subject to change without notice due to
product improvements.
● Care should be taken not to exceed the input power values
noted above.
PLACING THE SPEAKERS
■ Using as 2ch stereo speakers
Better stereo images will be obtained when the speakers are
slightly angled in towards the listeners.
■ Using as main speakers in a multi channel
system
Position the speakers on both sides of the TV. The positioning
of speakers is important, because it controls the whole sound
quality of a multi channel system. Set up the speakers on the
basis of your listening position by following the owner’s manual
supplied with your amplifier.
REMOVING THE FRONT COVER
The front cover is fastened to the enclosure at six points, and
can be removed if desired. To remove the cover, hold on to
both sides and slowly pull straight away from the speaker. To
reattach, line up the six pegs on the inside surface of the cover
with the six corresponding holes on the speaker and push
gently.
Note
When the cover is removed, take care not to touch the
speaker units with your hands or to exert excessive force
with tools.
Surround L
Surround R
Subwoofer
Center
NS-300/
NS-200
NS-300/
NS-200