Stopping engine – Yamaha F100A User Manual
Page 52
E
3-13
EMU00273
STOPPING ENGINE
Let it cool off for a few minutes at idle or
low speed first. Stopping the engine
immediately after operating at high speed
is not recommended.
EMU00276
1)
Turn the main switch to “OFF”.
2)
If the fuel joints are provided, discon-
nect the fuel line from the motor after
stopping the engine.
3)
Tighten the air vent screw on the fuel
tank cap after stopping the engine, if
it is equipped.
4)
Remove the key if the boat will be left
unattended.
NOTE:
The engine can also be stopped by
pulling the lanyard and removing the lock
plate from the engine stop lanyard switch
(then turning the main switch to “OFF”).
ON
START
OFF
701023
67F-9-15-3 4/26/01 1:35 PM Page 14
This manual is related to the following products: