Yamaha RX-V1000RDS - Manual (Page 23)

21
English
INTR
ODUCTION
PREP
ARA
TION
B
ASIC OPERA-
TION
AD
V
ANCED
OPERA
TION
ADDITIONAL
INFORMA
TION
APPENDIX
SPEAKER MODE SETTINGS
This unit has 6 SPEAKER SET items on the SET MENU that you must set according to the number of speakers in your
configuration and their size. The following table summarizes these SPEAKER SET items, and shows the initial settings
as well as other possible settings. If the initial settings are not appropriate for your speaker configuration, change the
settings on the SET MENU (see page 39).
Summary of SPEAKER SET Items 1A through 1F
Item Description Initial setting
1A CENTER SP LRG Selects the center channel output mode according to the size of the center speaker.
The possible settings are LRG (large), SML (small) and NONE.
1B MAIN SP Selects the main channel output mode according to the size of the main speakers.
The possible settings are LARGE and SMALL. LARGE
1C REAR L/R SP Selects the rear channel output mode according to the size of the rear speakers.
The possible settings are LRG (large), SML (small) and NONE. LRG
1D REAR CT SP Selects the rear center channel output mode according to the size of the rear
center speaker.
The possible settings are LRG (large), SML (small) and NONE. NONE
1E LFE/BASS OUT Selects a speaker for the LFE signal output and low bass signal.
The possible settings are SWFR (subwoofer), MAIN, and BOTH. BOTH
1F MAIN LEVEL Selects the output level for the main channel signal.
The possible settings are Normal and –10 dB. Normal
0104V1000RDS_19-23_EN 9/5/0, 4:41 PM 21