Yamaha VCD-100K - Manual (Page 13)

13
English
1
Load discs on the disc tray.
2
Press the KARAOKE button so that “KARAOKE” lights
up on the display. To cancel it, press the KARAOKE
button once again.
3
4
Select the disc (before “DISC” and “MUSIC” stop
flashing on the display).
5
Select the track (before “DISC” and “MUSIC” stop
flashing on the display).
6
7
To start play, press the PLAY/REPEAT button.
* This unit pauses whenever a play of track ends. To start
playing the next track, press the PLAY/REPEAT button.
8
Repeat step 3–6 to program more selections.
9
If necessary, change the audio output mode by pressing
the MPX button.
Use the KEY CONTROL buttons and the MIC LEVEL
and ECHO LEVEL controls as you prefer. (See page 12
for details.)
Notes
● In step 4 or 5, if “DISC” and “MUSIC” stop flashing on the
display before you finish programming a track, press the
PROG button again.
● If you program a track number which is higher than the
highest track number on the disc, “E rr” appears on the
display and it cannot be programmed.
● This unit can store as many as 10 selections at one time. If
you program a track number as the eleventh program, “E rr”
appears on the display and no more program can be made.
PRE-PROGRAMMING SELECTIONS
(FOR SINGING KARAOKE)
● Programming is possible either while the unit is playing a
disc or stopped.
●
As many as 10 selections can be stored at one time.
OPEN/ CLOSE
PROG
CANCEL MPX KARAOKE
1 2 3
4 5 6
7 8 9 0
ENTER
INDEX DISC SKIP
SEARCH SKIP PREV
RETURN SELECT
NEXT
KEY
CONTROL
STOP PLAY/ REPEAT
1 2 3
4 5 6
7 8 9 0
SELECT
PLAY/ REPEAT
PROG
DISC SKIP
KARAOKE
KARAOKE
MUSIC L R DISC
ENTER
5
9
2
6
7
3
9
4
Flashes.
DISC SKIP SKIP/SEARCH ECHO LEVEL
PREV NEXT
6 7 8 9 0
MIN MAX
PLAYXCHANGE OPEN/CLOSE
PLAY/SELECT STOP/RETURN VIDEO CD
MIC LEVEL
MIN MAX
KEY CONTROL
MIC 1 MIC 2
Version 2.0 / Interactive Operation
9