Yamaha CD-S2000 - Manual (Page 15)

15
En
■ Connecting to the BALANCED OUT jacks
Connect your amplifier with the XLR balanced output
jacks. The pin assignments for these jacks are shown
below. Refer to the owner’s manual supplied with your
amplifier and verify that its XLR balanced input jacks are
compatible with the pin assignments. When connecting, be sure to match the pins and insert the
connector of the “female” XLR balanced cable. When
disconnecting, pull out the “female” XLR balanced cable
while pressing down the latch lock on the plug.
AC IN
1: ground 2: hot
3: cold
“Female” XLR connector
“Male” XLR connector
Eng
lish