Yamaha RX-V340 - Manual (Page 38)

36
Recording adjustments and other operations are
performed on other recording components. Refer to the
operation instructions for these components for details on
their operation .
1 Turn on the power of this unit and all
connected components.
2 Select the source component you want to
record from.
3 Start playback (or select a broadcast station)
on the source component.
4 Start recording on the recording component.
Front panel Remote control
or
RECORDING
Notes
• Do a test recording before you start an actual recording.
• When this unit is set in standby mode, you cannot record
between the components connected to it.
• DSP programs and volume, bass, and treble settings do not
affect the recorded material.
• You cannot record from a source connected to the 6CH
INPUT jacks on this unit.
• Input sources are not output to the same OUT (REC) channel.
(For example, the signal input from VCR IN is not output to
VCR OUT.)
• You cannot record audio signals from a source connected to
the DIGITAL INPUT jack on this unit because the signals
from the DIGITAL INPUT jack and analog input jacks are
independent. Please connect a source to the analog in jacks if
you wish to record from the analog out jacks.
• Check the copyright laws in your country if you wish to
record from records, CDs, radio, etc. Recording of
copyrighted material may infringe copyright laws.
If you playback a video source that uses scrambled or
encoded signals to prevent it from being dubbed, the
picture itself may be disturbed due to those signals.
■ Special considerations when recording
DTS material
The DTS signal is a digital bitstream. Attempting to
digitally record the DTS bitstream will result in noise
being recorded. Therefore, if you want to use this unit to
record sources that have DTS signals recorded on them,
the following considerations and adjustments need to be
made.
For LDs, DVDs and CDs encoded with DTS, follow the
operating instructions of your player to set it to output an
analog signal, if it is compatible with the DTS format.
VOLUME
STANDBY /ON
AUTO/MAN`L MONO MAN`L/AUTO FM
TUNING MODE MEMORY
EDIT
PRESET/TUNING FM/AM
SILENT
PHONES
SPEAKERS A ON
B OFF EFFECT
PRESET/TUNING
SET MENU
A/B/C/D/E
NEXT
PROGRAM STEREO BASS/TREBLE CONTROL INPUT
6CH INPUT INPUT MODE
2
SYSTEM
POWER STANDBY POWER
AV
POWER
TV
POWER
TV
V-AUX VCR D-TV/CBL DVD
SLEEP TUNER MD/CD-R CD
TV
AMP
CODE SET
REC 6CH INPUT
AUDIO
DISC SKIP
+ + +
2
V-AUX VCR D-TV/CBL DVD
SLEEP TUNER MD/CD-R CD
INPUT
08V340R_32-39_EN(3.2.25).P65 03.2.25, 7:59 PM 36