beautypg.com

Zenoah GZ4000 User Manual

Page 3

background image

GZ4000

GB-3

G

B

Contents

1.

For Safe Operation ................................................................... 4

2.

Explanation of Symbols on the Machine .................................. 6

3.

Installing Guide Bar and Saw Chain ......................................... 7

4.

Fuel and Chain Oil .................................................................... 8

5.

Operating the Engine ............................................................... 9

6.

Sawing .................................................................................... 11

7.

Maintenance ........................................................................... 12

8.

Maintenance of Saw Chain and Guide Bar ............................ 13

9.

Troubleshooting Guide ........................................................... 14

10.

Disposal .................................................................................. 14

11.

Specifications ......................................................................... 15

EC DECLARATION OF CONFORMITY
to Directive 2006/42/EC on machinery and to Directive 2004/108/EC on
electromagnetic compatibility and to the regulations governing transposition
internal control production.

CONFORMS TO THE REQUIREMENTS OF THE MACHINERY DIRECTIVE
(Directive 2006/42/EC) AND TO THE NATIONAL REGULATIONS GOVERNING
ITS TRANSPOSITION ABROAD : AND

THAT IT HAS BEEN ISSUED WITH A CE CERTIFICATE (NO. M3 2992705 01)
by TUV Rheinland Group

- TUV Rheinland InterCert kft. Product Certification.

H

-1061 Budapest, Paulay Ede u. 52, Hungary

Manufacturer

:

Husqvarna Zenoah Co., Ltd.
1

-9 Minamidai, Kawagoe, Saitama, Japan

DECLARES THAT THE DESIGN OF THE MACHINE DESCRIBED BELOW.

Description

:

Chain Saw

Model

:

GZ4000

Serial no.

:

2010 000001 and up

Make

:

Husqvarna Zenoah

Date :

29 December 2009

Signature :

Kiyoshi Honda
General Manager, Development Center

Authorised representative :

Husqvarna AB
SE-561 82 Huskvarna, Sweden

Person authorised to compile the technical file :

Bengt Frögelius
SE-561 82 Huskvarna, Sweden