Manual tape-programming – Yamaha CDX-596 User Manual
Page 22
E-
18
Ⅵ
Manual tape-programming
This is for recording desired tracks in any order onto a tape.
1
Follow steps 1 – 3 on page 16.
2
Press PROG.
3
Use numeric buttons to select desired tracks (to be
recorded on side A) in any order.
*
Programmed track numbers light up on the display. You can
select a track which can be programmed for the remaining
time on side A from track numbers flashing on the display.
You cannot, however, select a track number extinguished
from the display.
4
When track selection for side A is finished, press
TAPE.
A pause is inserted.
5
Use numeric buttons to select the track numbers (to
be recorded on side B) in any order.
6
Begin recording on the tape deck, and then press
on this unit.
7
The unit will pause at the end of side A of the tape.
Turn the tape over to side B. Resume recording,
and then press
or
on this unit.
Notes
● If, in step 3 or 5, “ERROR” or “E rr” appears on the display,
the track number just selected cannot be programmed because
there is not enough time remaining on the tape. However, at
this time, if any other track number is flashing continuously on
the display, you can program it instead of the unprogrammable
one.
● In step 3 or 5, each time a selection is made, the track number
and the tape’s remaining time will be displayed, and then the
display will change to indicate the next program number.
● To check, cancel or correct program data, refer to page 15.
*
When checking program data, note that “PAUSE” or “Pu”
appears between track numbers for side A and side B.
● Up to 40 tracks can be programmed. If, however, a pause is
inserted, it is counted as one track.
● CD synchronized recording function can be used if your tape
deck is compatible with it. If so, in step 6 and 7, press
SYNCHRO and then press
on this unit’s remote control.
Recording automatically begins. (For details, refer to page 21.)
OPEN/
CLOSE
DIMMER
SYNCHRO
PEAK
SPACE
PROG
CLEAR
TAPE
3
2
1
6
5
4
9
8
7
INDEX
+
I0
0
TEXT/
TIME
RANDOM
REPEAT
4
3, 5
2
7
6, 7
PROG
3
2
1
6
5
4
9
8
7
+
I0
0
TAPE
3
2
1
6
5
4
9
8
7
+
I0
0
PROGRAM
1
11
2
12
3 4 5 6 7 8 9 10
A
TOTAL
REMAIN
PROGRAM
A
CDX-596
CDX-496, CDX-396
Blinks.
Blinks.
Blinks.