9 programme phase indicator lights – Zanussi ZWX 1505 W User Manual
Page 8
8
•Drain
Depress “Skip/Reset” three times, the pilot lights
“Wash”, “Rinse”and “Spin” go out.
Example:
In this case the machine
will perform the rinses
and spin.
• If the machine is switched off:
- depress “On/Off” button to switch it on;
- select the type of fabric by means of the relevant
button:
- select the special programme as previously
described.
Prewash
Wash
Rinse
Rinse Hold
Spin
Drain
Filter
End
9 Programme phase indicator
lights
When you select a programme, the lights relevant to the
phases that form the programme light up.
After you have started the programme, only the light
relevant to the phase that is currently being carried out
will remain lit.
At the end of the programme the “End “pilot light
illuminates.
If the “Filter” light lights up at the end of the programme
this means that the drain pump is clogged.
In the event of operating problems the “End “pilot light
starts to flash:
1 flash = the machine does not fill
2 flashes = the machine does not empty
4 flashes = the door has not been closed
To eliminate the problem, see paragraph “Something not
working”.
Prewash
Wash
Rinse
Rinse Hold
Spin
Drain
Filter
End