Yamaha CRW4261t-NB - Manual (Page 13)

Chapter 2 - Installing the Yamaha CRW4261t Drive
7
Installing the CRW4261t drive
The following steps will differ slightly depending on the type of com-
puter you are using.
For details on removing the cover from your computer, and installing or
removing internal devices, refer to the manual for your computer.
1. Switch off your computer, and unplug it from the AC outlet.
If you fail to do this, there is a danger of electric shock and/or of causing
short circuits, which may damage the computer and/or CRW4261t drive.
2. Remove the cover from your computer.
Be careful not to lose the screws that were removed.
PUSH
OFF