beautypg.com

Operation – Zanussi ZEF 100 W User Manual

Page 4

background image

Warning light (red)

If the temperature warning light

lights up, it

indicates that the temperature within the freezer has
reached a level where safe food storage is no longer
ensured.
When the freezer is first switched on, the warning
light will stay on until the temperature has dropped to
a safe level for the storage of frozen food.

Freezing fresh food

In any 24 hour period you can freeze up to 12 kg of
fresh food.

Activate fast freeze

by sliding the fast freeze switch

to the left (fast freeze position)

24 hours before

you want to freeze your fresh food, the yellow light

illuminates. This time can be shortened

depending on the quantity of food to be frozen. After
the time has elapsed place the food to be frozen in
the top compartment of the freezer as this is the
coldest part.

In the top compartment, products must only be
stacked up to the mark on the cabinet wall so as to
ensure that air circulation is not obstructed.
Once the food is completely frozen (which could take
up to 24 hours) return the fast freeze switch to the
ÇOFFÈ position; the yellow light

goes off.

Distribute the frozen food packages in the other
compartments, so that the top compartment can be
used for a further freezing operation.

4

Operation

Before use

Remove all securing tapes. Wash inside the
appliance with lukewarm water and bicarbonate of
soda (5 ml to 0.5 litre of water). Do not use soap or
detergent as the smell may linger. Dry thoroughly.

1

2

3

4
5

6

S

Fast freeze switch

Fast freeze light (yellow)

Mains-on light (green)

➁ ➂ ➃

Warning light (red)

Thermostat control

Freezer controls

Starting your appliance

Insert the plug into the wall socket. The pilot light

will light up to show that the appliance is on.

Temperature control

The temperature inside the freezer is regulated by a
thermostat with 6 temperature positions and one
ÇOFFÈ (O) position.
Position 1 = minimum cold
Position 6 = maximum cold
Turn the thermostat dial to the required position.
An intermediate position is usually the most suitable,
although the temperature will be affected by:
¥ Room temperature
¥ How often the door is opened
¥ How much food is stored
¥ Position of the appliance

In determining the correct temperature control setting
all these factors have to be considered and some
experimentation may be necessary.
To obtain a colder temperature, turn the thermostat
control to the higher numbers; to obtain a warmer
temperature turn the control to the lower numbers.
When altering the temperature setting, allow 24
hours for the temperature to stablise before making
further changes.
For easier turning of this control, use a small coin.