beautypg.com

Installation instructions, Technical information, Electrical requirements – Zanussi ZHC 950 User Manual

Page 11: Electrical connection

background image

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890

INSTALLATION INSTRUCTIONS

It is dangerous to alter the specifications or attempt to modify this product in any way.

Technical information

DIMENSIONS

HEIGHT OF CANOPY:

(incl glass visor)

52mm

HEIGHT OF CHIMNEY:

(UPPER SECTION)

465mm

(LOWER SECTION)

740mm

WIDTH OF CANOPY:

(incl glass visor)

898mm

DEPTH OF CANOPY:

(incl glass visor)

520mm

ELECTRICAL SUPPLY

VOLTAGE:

(~50Hz)

220-240V

POWER CONSUMPTION:

230W

FAN MOTOR:

150W

LAMPS:

(2 x40W)

80W

SUITABLE FOR -
INSTALLATION ABOVE:

ELECTRIC HOB:

7KW (MAX)

GAS HOB:

10KW (MAX)

SLOT-IN ELECTRIC COOKER:

12.4KW (MAX)

SLOT-IN GAS COOKER:

13.5KW (MAX)

THIS APPLIANCE MUST BE EARTHED

Electrical Requirements

Any permanent electrical installation must
comply with the latest I.E.E. Regulations and
local Electricity Board regulations. For your own
safety this should be undertaken by a qualified
electrician e.g. your local Electricity Board, or a
contractor who is on the roll of the National
Inspection Council for Electrical Installation
Contracting (NICEIC).

Electrical Connection

Before connecting to the mains supply ensure
that the mains voltage corresponds to the
voltage on the rating plate inside the cooker
hood.

Note: CE Marking certifies that this appliance complies with the
requirements laid down in EEC directive 89:336 (Electromagnetic
compatibility) and subsequent modifications and Low Votage directive
72/23/E.

This appliance is fitted with a 3 core mains
cable and must be permanently connected to
the electricity supply via a double-pole switch
having 3mm minimum contact gap on each
pole. A Switched Fuse Connection Unit to
BS.1363 Part 4, fitted with a 3 Amp fuse, is a
recommended mains supply connection
accessory to ensure compliance with the
Safety Requirements applicable to fixed
wiring instructions.

This appliance conforms to BS.800:1988 and
EEC Directive No. 78 308 regarding
suppression of radio and television
interference.

9