Yamaha R-V702 R-V502 - Manual (Page 24)

9
Adjust the sound output levels of the center speaker and
the rear speakers so that they become almost as same
as that of the main speakers.
Make the adjustment of each speaker output level at your
listening position with the remote control transmitter.
a) Press once or more so that “CENTER” or “REAR”
appears on the display.
* Select “CENTER” to adjust the output level of the
center speaker, and select “REAR” to adjust the
output level of the rear speakers.
b) Adjust its level.
* Pressing the + side raises and the – side lowers the
level.
10
Cancel the test tone.
Notes
● Once you have completed these adjustments, you can
adjust whole sound level on your audio system by using
the VOLUME control (or the VOLUME keys on the remote
control transmitter) only.
● If you use external power amplifiers, you may also use
their volume controls to achieve proper balance.
● R-V702 only
In step 9, if the center channel mode is in the
“PHANTOM” position, the sound output level of the center
speaker cannot be adjusted. This is because in this
mode, the center sound is automatically output from the
left and right main speakers.
22
REC/PAUSE DIR B DIR A PLAY
DISC
POWER VOLUME
PLAY
PRESET A/B/C/D/E – +
TEST DELAY TIME EFFECT
PROGRAM PROLOGIC ENHANCED
– +
SLEEP
TAPE A/B
ON/OFF
TUNER
CD
PHONO
VIDEO VCR
R-V502 R-V702
REC/PAUSE DIR B DIR A PLAY
DISC
POWER VOLUME
PLAY
PRESET A/B/C/D/E – +
TIME/
LEVEL TEST EFFECT
PROGRAM PROLOGIC ENHANCED
– +
SLEEP
TAPE A/B
ON/OFF
TUNER
CD
PHONO
DELAY/CENTER
/REAR
DVD/LD VCR TV/DBS
10
10
9
R-V502
TIME/
LEVEL – +
R-V702
DELAY/CENTER
/REAR/SWFR
Disappears.
TEST
CENTER
LEVEL
0 l0
REAR
LEVEL
0 l0
l6 20
28
40
60
l2
8
4
2
0 –dB
9