Zap ELECTRIC SCOOTER User Manual
Page 8
ADJUSTING THE GAS STRUT POSITION
•
(Fig.6) The ZAPPY is equipped with a gas strut that is adjustable
to two different levels of resistance. If the rider has difficulty fold-
ing the ZAPPY, the gas strut can be moved to the light position.
DRIVE BELT ADJUSTMENT
•
The drive belt on the ZAPPY will periodically need adjusting to
maintain proper tension. The belt should deflect about 6mm (1/4
inch) with slight pressure applied at the center of the belt. Before
servicing the ZAPPY, disconnect the battery power connector to
prevent accidental starting of the ZAPPY.
ALWAYS WEAR A HELMET!
7
Fig.6
Heavy
Light