beautypg.com

Technical specifications installation, Positioning – Zanussi ZV 48 RF User Manual

Page 13

background image

DIMENSIONS

Height

85

cm

Width

59.5

cm

Depth

60

cm

POWER SUPPLY VOLTAGE AND FREQUENCY

220-240 V / 50 Hz

TOTAL POWER ABSORBED

90 W

AVERAGE DAILY UNITS ELECTRICITY(*)

0,9 kWh

GROSS CAPACITY

100 l

(3,54 cuft)

NET CAPACITY

80 l

(2,82 cuft)

STAR RATING

(*)This figure is based on standard test results in accordance with the European Standard EN153. Actual con-
sumption will depend on how the appliance is used and where it is located.

TECHNICAL SPECIFICATIONS

INSTALLATION

13

Positioning

For this appliance to work efficiently, it should be
located away from heat sources, e.g. cookers, radia-
tors, boilers, direct sunlight etc. This also includes
locations or rooms where the ambient temperature
reaches above 32°C (90°F) or drops below 10°C
(50°F),e.g. conservatories.
You should also ensure that air can circulate freely
around the back and the top of the cabinet. There
must also be a minimum distance beween the top of
the cabinet and any overhanging kitchen furniture as
shown in the figure.
Do not obstruct the space underneath. The back of
the cabinet may be placed close to the wall but must
not touch it. DO NOT install in places with restricted
ventilation.

Adjust the level of the appliance by screwing out the
adjustable foot, or feet, at the bottom of the cabinet
using your fingers.

D200

100 mm

10 mm

10 mm

A

B

NP006