Zanussi U28059 ZFC 177 C - Manual (Page 14)

14
Positioning
Place the freezer horizontally on a firm surface,
resting on all four wheels. Use a wooden block or
similar object to compensate for any bumps/holes
in the floor's surface.
The room should be dry and adequately ventilated.
Temperatures of the external environment have an
impact on the energy consumption of the freezer.
Therefore:
- do not place the freezer in a position exposed to
sunshine or beside a radiator oven, or any other source
of heat.
- position it where the temperature of the environment
corresponds to the climatic classification for which the
freezer was designed.
Climatic classification Ambient temperature limits
From to
SN +10 to +32 C
N +16 to +32 C
ST +18 to +38 C
T +18 to +43 C
If the freezer has been handled standing on end, it
should be allowed to stand in the normal position
for about 12 hours before switching it on.
Ensure that the appliance is installed where it is
easily accessible for the engineer in the event of a
breakdown.
Technical Specifications
Installation
Model
Volume (gross) litres
Volume (net) litres
Height with rollers cm
Width cm
Depth cm
Weight kg
Energy consumpt./24h kWh
Freezing capacity kg/24h
Hold-over time hours
Rated power W
ZFC 177 C
500
495
87,6/88,3
160
66,5
66
1,609
20
32
130
this appliance complies with the following EC Directives:
- 73/23/EEC of 19. 02. 1973 - Low-Voltage Directive
- 89/336/EEC of 03. 05. 1989 (including Amendment Directive 92/31/EEC - EMC Directive.
Some of the models are not available in all countries.
Testing has been carried out in accordance with ISO 5155 regarding the determination of freezer capacity, energy consumption and hold-overtime.
Information for test institute: A plan of the positioning of test packages may be obtained directly from the manufacturer.