ZEROtherm BTF80 - Manual

Applicable Models
• ZEROtherm BTF80(100% Aluminum Fin)
• ZEROtherm BTF90(100% Copper Fin)
Specifications
678g
BTF90
108 x 81 x 128 mm
(5.04 x 3.19 x 4.25 inch)
Dimension
(L x W x H)
Heat Pipe
Base
Fin
Over 150W
Copper
Over 140W Cooling capacity
458g
Weight
(W/O Optional Components)
Copper(Sintered type)
Copper
Aluminum
Max. 42.8CFM Airflow
Max. 1.54W Consuming power
12 VDC Operating voltage
4-pin(PW M) Connector
Under 27.0dB±10% Acoustical noise
750 ~ 2,500rpm±10% Fan speed
92 x 25mm (3.62 x 0.98 inch) Fan size
4,404cm 2 (682.6inch 2 ) Heat dissipation area
Material
BTF80 Models
Features
Precaution
USER’S MANUAL
Please read this USER’S MANUAL carefully before installation
Installation(Intel–Socket 775) Installation(AMD–Socket 754/939/940/AM2)
• Spread Thermal Grease
1) Clean off particles or dust from the top of the CPU.
2) Spread thermal grease thinly and evenly on top of the CPU
• Install AMD Clip
1) Install AMD clip using a driver on the bottom of the cooler
2) The AMD clip can be installed horizontally or vertically in
accordance with your motherboard’s RM (Retention
Mechanism).
[Caution] Excessive force may damage the heat pipes . It is
easy to install the clip after laying the product down
sideways like [ P icturer 12~ 15]
• Install Cooler
1) Fasten the screws with a driver and install the cooler on the
CPU.
[Caution] Make sure that there are no interfering
components before installing the cooler
Horizontal type
Vertical type
Silence Innovations
• Ultra maglev forms oil protection bearing technology adapted
• PWM fan speed control (750~2,500rpm)
• Optimized airflow design
Killer Performance
• Efficient 8-line heat pipe effects
•
Polished copper base for better thermal conductivity
• High performance thermal grease adapted(TC-5022)
Creative & Cool Design
• Unique butterfly motif fins
•
Super bright LEDs
Compatibility
• Intel socket 775 up to Core
TM 2 Duo
• AMD socket 754, 939, 940 and AM2
Patents
• Republic of Korea patent application No. : 40-0564565-0000
• Republic of Korea design application No. : 30-2006-21470
• Patent applications pending around the world including USA, EU,
and Japan
Waranty & Disclaimer
12 12 12 12
14 14 14 14
13 13 13 13
15 15 15 15
[English]
• CPU and motherboard are subject to damage if the product is
incorrectly installed. Familiarize yourself with this “USER’S
MANUAL” before installing the product.
• Excessive force may result in malfunction or damage to the fan,
the product or the computer. Avoid inserting any objects into
the fan while operating.
• The product is not compatible with a slim body type case.
Please check the compatibility at www.zerotherm.co.kr (or
www.apack.net)
• APACK Inc is not responsible for any damage to the product,
and/or the computer including CPU resulted from:
1). Incorrect installation
2). CPU overclocking
.
• Install Back Plate
1) Remove the thin paper film from the back plate to expose the
insulating tape. [Picture 4]
2) Attach the back plate to the back side of the main board with
the socket RM (Retention Mechanism) holes lined up.
• Spread Thermal Grease
1) Clean off particles or dust from the top of the CPU.
2) Spread thermal grease thinly and evenly on top of the CPU
• Install Intel Clip
1) Install Intel clip using a screw driver on the bottom of the cooler
[Caution] Excessive force may damage the heat pipes . It is
easy to install the clip after laying the product down
sideways like [ P icture 8].
• Separate Fan Component
1) In order to install the product on Intel CPU, the fan should be
separated from the unit.
2) Gently grasp the fan rail (Red Bar) and pull it up and out of the
unit.
3) If you use a bar or a driver like [ P icture 9], you can easily pull
the fan up and out of the unit.
[Caution] Be careful not to damage the fins when you pull
the fan up with a bar or a driver.
• Install Cooler
1) Fasten the screws with a driver and install the cooler on the
CPU.
[Caution] Make sure that there are no interfering
components before installing the cooler.
• Install Fan Component
1) Push the fan down on the bracket rail like [ P icture 10 and 11]
• Warranty : 2 Years from the purchase date
• APACK INC. is not responsible for any damage due to
external causes, including but not limited to, improper use,
problems with electrical power, accident, neglect, alteration,
repair, improper installation, or improper testing.
- www.zerotherm.co.kr // www.apack.net
- [email protected]
Components
① CPU Cooler (front view)
② CPU Cooler (Separated Fan)
③ Intel Clip
④ Back Plate (for Intel)
⑤ Clip Screws (4 pcs, for Intel)
⑥ AMD Clip
⑦ Thermal Grease
⑧ User’s Manual
Intel Clip
AMD Clip
Back Plate(For Intel)
Clip Screw (4pcs)
Thermal Grease
2 2 2 2
3 3 3 3 5 5 5 5
6 6 6 6
7 7 7 7
4 4 4 4
Heat Pipe
Fin
Bracket
Fan
Block
1 1 1 1
Fan Rail
CPU Cooler
Bracket Rail
BIOS SETUP
Since ZEROtherm CPU coolers feature extreme low fan
speed (RPM) while achieving optimal results, it is possible
that you may experience an initial booting error prompting “CPU
Fan Error!” This seldom happens since only a few number of
mother board brands (including ASUS) report this problem.
This “CPU Fan Error!” message has nothing to do with a real
system error and can be easily fixed.
When “CPU Fan Error!” prompts, set up the BIOS as
followings:
① Booting Error – CPU Fan
Error
!
③ Boot Settings Configuration
⑤ Wait For ‘F1’ If Error – Disabled
② BIOS Setup – Boot tap
④ “ W ait For ‘F1’ If Error ” Options
⑥ Save configuration changes and
exit
A few number of mother
board brands (including
ASUS) may prompt “CPU
Fan Error!”
Press the “DEL” button on the
keyboard to set up the BIOS.
Select “Boot” tap and “Boot
Settings Configuration”
Select “Wait For ‘F1’ If Error ” Press the “Enter” button on
the keyboard. Change its
options into “Disabled”.
Now Wait For ‘F1’ If Error
options are Disabled. Press “F10” button in your
keyboard. Select “OK”,
when the prompt ask if you
want to save configuration
changes and exit now.
Remove the thin paper film, and then
attach the back side of the main board
Separate the fan from the cooler,
and then install cooler from the main board
Install Intel Clip
Install the fan
08 08 08 08
09 09 09 09
04 04 04 04
10 10 10 10 11 11 11 11
Fan Rail
Bracket Rail