Yamaha CDX-880 EN - Manual (Page 15)

1
Stop the unit.
* The peak level searching function of this unit is useful for
adjusting recording level on the tape deck. (Refer to
page 18.)
2
If desired, you can automatically insert additional time
space between tracks. (Refer to page 10.)
3
Enter the tape’s total possible recording time.
You can select any of four tape lengths by pressing
the TAPE button.
4
Otherwise, you can also enter the tape’s total possible
recording time manually.
Example: For a C-64 tape (32 minutes on each side)
5
* By pressing the REPEAT button, the unit automatically
programs tracks for side A and side B separately
considering the tape’s total time.
6
Begin recording on the tape deck and press the
PLAY button on this unit at the same time.
7
The unit will pause at the end of side A of the tape.
Turn the tape over to side B. Resume recording and, at
the same time, press the PLAY or PAUSE button on
this unit
.
Notes
•
All tracks may not be programmed if the tape’s length is not
enough. To program all tracks, use a longer tape.
•
In step 5, you can check the program data for side A and
side B.
➀
Shows the number of programmed tracks for each side in
turn just after the automatic programming is finished, and
then it is replaced by the number of the first programmed
track for side A.
➁
Shows the total time of programmed tracks for each side.
➂ Shows the side of the tape.
➃
Shows the programmed track numbers for each side.
• CD synchronized recording function can be used if your
tape deck is compatible with it. In this case, in step 6 and 7,
press the SYNCHRO button and then press the PLAY
button on this unit’s remote control transmitter. Recording
automatically begins. (For details, refer to page 19.)
15
TRACK PROGRAMMING FOR RECORDING TO TAPE
This convenient feature can be used to program tracks on a disc for recording to tape. By only memorizing the tape’s total possible
recording time, the unit will automatically program tracks or help you to program tracks so they will fit onto the tape with the least
amount of unrecorded space remaining at each end of the tape.
Ⅲ
Automatic tape-programming
This is for recording only the tracks which best fit onto a tape.
STOP
SPACE
SPACE
TAPE
TAPE
PROGRAM
A
1 2 3 4 5
TOTAL
➀ ➁
➃ ➂
S/F
REPEAT
(off)
4
10
DIMMER TIME OPEN/CLOSE
PROG CLEAR
SPACE S/F RANDOM
REPEAT
1 2 3
4 5 6
7 8 9 0
+
SKIP PLAY PAUSE
SEARCH STOP INDEX
OUTPUT LEVEL + –
TAPE PEAK
SYNCHRO
5
6, 7
1
7
2
3
6 4