Zenoah G2000T User Manual
Page 3
G2000T
GB-3
G
B
Contents
1.
For Safe Operation ................................................................... 4
2.
Explanation of Symbols on the Machine .................................. 8
3.
Installing Guide Bar and Saw Chain ......................................... 9
4.
Fuel and Chain Oil .................................................................. 10
5.
Operating the Engine ............................................................. 11
6.
Sawing .................................................................................... 12
7.
Maintenance ........................................................................... 14
8.
Maintenance of Saw Chain and Guide Bar ............................ 15
9.
Troubleshooting Guide ........................................................... 16
10.
Disposal .................................................................................. 16
11.
Specifications ......................................................................... 17
Masahiko GOUDA
General Manager, Quality Assurance Department
Signed in Saitama, Japan
1st December 2007
DECLARATION OF CONFORMITY TO MACHINES DIRECTIVE
(Directive 98/37/EC, 89/336/EEC)
and to the regulations governing transposition
Internal control production
MANUFACTURER :
Husqvarna Zenoah Co., Ltd.
No. 9, 1-Chome
MINAMIDAI, KAWAGOE City
SAITAMA, JAPAN
DECLARES THAT THE DESIGN OF THE MACHINE DESCRIBED BELOW:
Model
: G2000T
Serial no.
: 800001 and up
Make
: ZENOAH
CONFORMS TO THE REQUIRMENTS OF THE MODIFIED MACHINES DIRECTIVE
(Directive 98/37/EC) AND TO THE NATIONAL REGULATIONS GOVERNING ITS
TRANSPOSITION ABROAD : AND
THAT IT HAS BEEN ISSUED WITH A “CE”CERTIFICATE, NO. U3 2792037 01 BY
TÜV Rheinland Group - TÜV Rheinland InterCert kft. Product Certification - H - 1061
Budapest Paulay Ede u. 52 - HUNGARY