Yamaha RX-V361 - Manual (Page 48)

44
En
Set menu
Option menu 3 OPTION MENU
Use this menu to manually adjust the optional system parameters.
The “XM RADIO SET” parameter is only applicable to the U.S.A. and Canada models.
■ Signal information
SIGNAL INFO
Use this feature to check audio signal information (see page 30).
Use the remote control to access and adjust each
parameter.
y
You can change the set menu parameters while this unit is
reproducing sound.
1
Press D
AMP and then press PMENU on
the remote control.
“BASIC SETUP” appears in the front panel display.
2
Press Gk / n to select “MANUAL SETUP”.
3
Press G
ENTER to enter “MANUAL SETUP”.
“1 SOUND MENU” appears in the front panel
display.
4
Press Gk / n repeatedly and then press
G
ENTER to select and enter the desired
menu.
The following menus appear in the front panel
display as you press G k / n repeatedly.
5
Press Gk / n repeatedly and then press
G
ENTER to select and enter the desired
submenu.
• Repeat steps 5 and 6 to navigate to and enter the
items you want to adjust.
• To return to the previous menu level, press H
RETURN.
6
Press Gk / n to select the desired parameter
and then Gl / h to change the parameter
value.
• Press
G h to increase the value.
• Press G l to decrease the value.
7
Press P
MENU to exit from set menu.
Parameter Features Page
A)DISPLAY SET
Adjusts the brightness of the front panel display and the way in which the XM information
is displayed.
50
B)MEMORY GUARD Locks sound field program parameters and other set menu settings. 50
C)AUDIO SELECT
Designates the default audio input jack select setting mode for the input sources connected
to the DIGITAL INPUT jacks when you turn on the power of this unit.
50
D)PARAM. INI Sets all the parameters of the sound field programs to the initial factory settings. 50
E)XM RADIO SET Displays the current reception level of the XM Satellite Radio signals. 50
Note
Using set menu
BASIC SETUP
.
MANUAL SETUP
.
1 SOUND MENU
1 SOUND MENU
2 INPUT MENU
3 OPTION MENU