Setting the sleep timer – Yamaha RX-V4/390 User Manual

Page 26

Whenever the SLEEP key is pressed, the SLEEP time will
change as follows.

After a while, the display returns to the indication before
the SLEEP timer is set, and the “SLEEP” indicator is
illuminated.

The unit will be turned off automatically at the selected
SLEEP time.

SETTING THE SLEEP TIMER

If you use the SLEEP timer of this unit, you can make this unit turn off automatically. When you are going to sleep while enjoying a
broadcast or other desired input source, this timer function is helpful.

Notes

●

The SLEEP timer can be controlled only with the remote control transmitter.

●

The components on which the SLEEP timer is effective are the sources connected to the SWITCHED AC OUTLET(S) on the rear
panel of this unit.

To set the SLEEP time

Press once or more to
select the desired
SLEEP time.

Indicates the SLEEP time.

Flashes.

Lights up.

To cancel the selected SLEEP time

Press once or more so that the display returns to the indication
before the SLEEP timer is set. (“SLEEP” will go off from the
display.)

Press once or more so that “SLEEP OFF” appears on the
display. (It will soon disappear and the “SLEEP” indicator will
go off from the display.)

Note
The SLEEP timer setting can also be canceled by turning off
the power with the POWER switch or disconnecting the power
plug of this unit from the AC outlet.

SLEEP

ENTER

SLEEP

120

The SLEEP timer is off (OFF).
(The state before the SLEEP key
is pressed.)

(Minutes)

RX-V390

RX-V490

RX-V390

NING

SLEEP