Yamaha CDC-625 - Manual (Page 10)

➀
Shows the program number for the track to be set next.
➁
Shows the selected disc and track number.
➂
Shows the total time of the tracks currently programmed, if
tracks are selected from one disc only.
➃
Shows only the numbers of programmed tracks.
* If “P-01” does not appear in the display after the PROG
button is pressed, press the TIME display mode-select
button.
* If the total time reaches 100 minutes or more, only the last
two-digits will be displayed for the three-digit number.
10
3
4
3
1 5
2
➀
➁ ➂
➃
4
5
1
2
3
or
or
or
(Press once.)
or
or
or
(Select a track
number.)
1
Stop the unit.
2
3
If necessary, select the desired disc.
4
Select the desired track.
5
When the programming is completed;
*Repeat steps 3 and 4 to set more programs.
Display information during program play
PROGRAM PLAY
You can enjoy listening to your favorite tracks selected from one or plural discs in any desired order using a programmed play.
* The use of the remote control transmitter is recommended for easier operations.