Yamaha DSP-A990 - Manual (Page 32)

30
To record a source other than the input source
This unit has a function of selecting a source to be recorded to tape
deck or VCRs independent of the selection of input source.
1. Press the REC OUT switch (so that “REC OUT...” appears on the
display and the monitor screen).
Front panel
2. Within 5 seconds, select the source to be recorded with an input
selector switch. (The indicator corresponding to the selected
source to be recorded will flash.)
Front panel
3. Press the REC OUT switch (so that the indicator corresponding
to the selected source to be recorded stops flashing).
* The same result will be obtained after 5 seconds without any
operation.
4. Play the source and confirm it by selecting it with an input selector
switch and increasing the setting of the master VOLUME control.
Front panel
5. Set the tape deck or VCR used for recording to the recording
mode.
* Adjust the recording level on the tape deck or VCR.
6. While recording a source, you can enjoy listening to and/or
watching another source selected with the input selector switch.
While recording, you can monitor the audio and/or video signals
to be recorded by selecting the tape deck or VCR used for recording
with the input selector switch.
PHONO
TV/DBS
INPUT SELECTOR VCR I CD LD
REC OUT CD
PHONO
TV/DBS
INPUT SELECTOR VCR I CD LD
PHONO
TV/DBS
INPUT SELECTOR VCR I CD LD
TUNER
Front panel
or
Remote control