Yamaha CRX-M5 - Manual (Page 10)

GETTING STARTED
E-4
AUX/MD
A
L
R
TAPE
MD
SYSTEM
CONNECTOR
DIGITAL OUT
L
R
B C D
TAPE
IN IN OUT OUT
OUT
SUBWOOFER SPEAKERS
FM GND AM
ANTENNA
75
UNBAL
CD
OPTICAL
8 MIN. /SPEAKER
R L
+ + – –
8 MIN. /HAUT-PARLEUR
+ – + –
Connecting the system
Never plug the AC power cord to the wall outlet until all connections are completed.
Follow the steps as shown below to connect the system using the supplied cords and accessories.
1
Connect the speakers.
Connect the speaker cords to the SPEAKERS
terminals so that the polarity of the speaker cables
is correct.
Keep the speaker cords away from the antennas to
prevent noise.
2
Connect the AM antenna.
Set up the AM loop antenna, then connect it.
3
Connect the FM antenna.
4
Connect the AC power cord to a wall outlet.
To connect the subwoofer (optional)
You can reinforce the bass frequencies by adding a
subwoofer (optional).
Connect the SUBWOOFER OUT terminal of the unit to
the INPUT terminal of the subwoofer amplifier, and
connect the speaker terminals of the subwoofer
amplifier to the subwoofer.
With some subwoofers, the amplifier and subwoofer are
in the same unit.
AC outlet (U.S.A., Canada, Europe, General,
Singapore models only)
You can connect the AC power plug of the other
component up to 100W power. It is convenient to
connect the MDX-M5 or KX-M5.
1
2 3
4
To wall outlet
FM antenna AM loop antenna
Right speaker Left speaker
–
+
FM
75
UNBAL
GND AM