Zenith Z56DC1D - Manual (Page 19)

Owner’s Manual 19
Notes:
- Depending on the graphics card, DOS mode may
not work if a HDMI1 to DVI Cable is in use.
- When Source Devices connected with HDMI/DVI
Input, output PC Resolution(VGA, SVGA, XGA),
Position and Size may not fit to Screen. As shown
the picture below, press the ADJUST button to
adjust the screen Position of TV SET and contact
an PC graphics card service center.
- When Source Devices connected with HDMI/DVI
Input, output TV SET Resolution(480p, 720p,
1080i) and TV SET Display fit EIA/CEA-861-B
Specification to Screen.
If not, refer to the Manual of HDMI/DVI Source
Devices or contact your service center.
- In case HDMI/DVI Source Devices is not connected
Cable or poor cable connection, "No signal" OSD
dis-play in HDMI/DVI Input. In case that Video
Resolution is not supported TV SET output in
HDMI/DVI Source Devices, "Invalid Format" OSD
display. Refer to the Manual of HDMI/DVI Source
Devices or contact your service center.
Resolution
640x480
800x600
Horizontal
Frequency(KHz)
48.363
56.476
60.023
Vertical
Frequency(Hz)
1024x768
Monitor Display Specifications (RGB-PC or HDMI/DVI Mode)
35.156
37.879
48.077
46.875
56.25
60.31
72.18
75.00
60.00
70.06
75.02
640x350 31.468
31.469
37.861
37.500
70.09
59.94
72.80
75.00
RGB-PC
Mode Only