Yamaha YHT KX-493 User Manual

Page 6

To stop playback:

Press the

button.

To fast forward the tape:

Press the

⁄ button.

To fast rewind the tape:

Press the

! button.

To adjust the volume level:

Use the volume control of the amplifier or receiver.

To use headphones for private listening:

Insert the headphones plug into the

PHONES

jack.

To adjust the headphones level:

Use the

PHONES LEVEL

control.

DOLBY NR button setting (in step 2)

DOLBY NR (OFF/ B/ C/MPX) button

Be sure to set the

DOLBY NR (OFF/

C/MPX)

button according to the system used for recording. Each
time this button is pressed, Dolby NR switches as follows:

B(MPX OFF) For a tape recorded with DOLBY B NR

Only the B indicator lights.

C(MPX OFF) For a tape recorded with DOLBY C NR

Only the C indicator lights.

B MPX ON

(available only for recording)

C MPX ON

(available only for recording)

OFF

For a tape recorded with DOLBY NR
OFF
No indicator lights.

Note

: The MPX filter settings are explained on page 9.

PLAY TRIM control adjustment

When the level of high frequencies is too boosted or
absent while playing a tape recorded on another cassette
deck, adjust the high frequency response with the

PLAY

TRIM

control.

When high frequencies are
absent, boost the high
frequencies.

When high frequencies are
too boosted, attenuate the
high frequencies.

∞

100

10k 20k Hz

10 dB

Noise Reduction Responce

NR-OFF

B-NR

C-NR

KX-493

KX-393

PLAY TRIM

100

10 dB

10kHz

High frequency sound is
too boosted.

Flat.

High frequency sound is
absent.