Yamaha CRW8824SX Series - Manual (Page 21)

12
Setting Up The CRW8824SX Drive
There are three stages to setting up your CRW8824SX drive.
● Installing a SCSI adapter card
You will need to open the casing of your computer and insert a SCSI adapter
card (sold separately) if one has not been installed already.
n You will need a Phillips screwdriver to open the casing of the computer and to
secure the SCSI adapter card in its slot.
● Connecting the drive
You will need to connect your CRW8824SX drive to your computer’s SCSI
adapter card using a SCSI cable. You will also need to connect the included
power cable between the drive and an electrical outlet.
● Verifying the Hardware Installation
Before you can begin using your CRW8824SX drive, you need to verify that it
has been installed and recognized correctly.