Yamaha RX-V359 - Manual (Page 42)

38
FM/AM TUNING
You can also store up to 40 stations (A1 to E8: 8 preset
station numbers in each of the 5 preset station groups)
manually.
1
Tune into a station automatically or manually.
See pages 35 and 36 for tuning instructions.
When this unit is tuned into a station, the front panel
display shows the frequency of the station received.
2
Press MEMORY.
The MEMORY indicator flashes in the front panel
display for approximately 5 seconds.
3
Press A/B/C/D/E repeatedly to select a preset
station group (A to E) while the MEMORY
indicator is flashing.
The preset station group letter appears. Check that the
colon (:) appears in the front panel display.
4
Press PRESET/TUNING/CH l / h to select a
preset station number (1 to 8) while the
MEMORY indicator is flashing.
• Press h to select a higher preset station number.
• Press l to select a lower preset station number.
5
Press MEMORY while the MEMORY indicator
is flashing.
The station band and frequency appear in the front
panel display with the preset station group and
number you have selected.
6
Repeat steps 1 through 5 to store other
stations.
• Any stored station data existing under a preset station
number is cleared when you store a new station under the
same preset station number.
• The reception mode (stereo or monaural) is stored along
with the station frequency.
Manual preset tuning
(U.S.A. model)
PRESET/TUNING/CH
VOLUME
STANDBY /ON
PHONES
SILENT CINEMA
SPEAKERS A/B/OFF
FM/AM PRESET/TUNING A/B/C/D/E l h
NEXT AUTO/MAN'L MAN'L/AUTO FM
MEMORY TUNING MODE
EFFECT
STRAIGHT
TONE CONTROL BASS/TREBLE
l PROGRAM h
EDIT
INPUT MODE
l INPUT h
MULTI CH INPUT
SET MENU
SEARCH MODE XM CATEGORY DISPLAY
3 2,5 4
TUNED
A AM 630 kHz
MAN'L/AUTO FM
MEMORY
MEMORY
Flashes
A/B/C/D/E
NEXT
CATEGORY
Preset station
group
Flashes
Colon (:)
TUNED MEMORY
: C AM 630 kHz
Notes
PRESET/TUNING/CH l h
SET MENU
TUNED MEMORY
: C3 AM 630 kHz
Preset station number
Flashes
The displayed station has been stored as C3.
MAN'L/AUTO FM
MEMORY
TUNED
: C3 AM 630 kHz